Cutting vibration usually occurs in the turning of slender shafts, thin-walled components, etc. When the vibration becomes intense, severe vibrations with amplitudes exceeding tens of micrometers are usually accompanied by significant noise. When cutting, the vibration may exceed 100 μ m, and machining is possible, but leaving obvious vibration scratches on the machined surface is not allowed on the precision machined surface.

Die vibratie genereer deur metal knip is 'n baie skandelike fenomen.

1. Affects the surface quality of parts

As vibratie voorkom tydens masjien, sal relative verskuiling tussen die nutsbalk en die werksstuk voorkom, wat resulteer in vibreeringsmerke op die masjien-oortjie, wat ernstig die oortjie kwaliteit en prestasie van die komponent beïnvloor

2. Reduce the lifespan of machine tools and tools

When cutting vibration occurs, the process system is continuously subjected to dynamic AC loads, and the cutting tools are very prone to wear (even tool breakage). The connection characteristics of the machine tool are destroyed, and in severe cases, cutting cannot continue

3. Ruis kan skade veroorsaak aan die gesondheid van operators

Die geluid genereer tydens vibratie kan ook die gesondheid van die operator skade.

In order to reduce vibration, it is sometimes necessary to lower the cutting amount and decrease the production efficiency of machine tool processing.

Therefore, in order to ensure the normal operation of this mechanical processing equipment, the control of cutting vibration has become increasingly important.