Cutting vibration usually occurs in the turning of slender shafts, thin-walled components, etc. When the vibration becomes intense, severe vibrations with amplitudes exceeding tens of micrometers are usually accompanied by significant noise. When cutting, the vibration may exceed 100 μ m, and machining is possible, but leaving obvious vibration scratches on the machined surface is not allowed on the precision machined surface.

Vibracija proizvedena od rezanja metal a je vrlo štetan fenomen.

1. Affects the surface quality of parts

Ako se vibracija pojavi tijekom strojeva, dogodit će se relativno preseljenje između alata i radnog djela, što će rezultirati oznake vibracije na površini strojeva, što ozbiljno utjecati na kvalitet površine i učinkovitost komponenta

2. Reduce the lifespan of machine tools and tools

When cutting vibration occurs, the process system is continuously subjected to dynamic AC loads, and the cutting tools are very prone to wear (even tool breakage). The connection characteristics of the machine tool are destroyed, and in severe cases, cutting cannot continue

3. Glas može uzrokovati štetu zdravlju operatora

The noise generated during vibration can also harm the health of the operator.

Da bi se smanjila vibracija, ponekad je potrebno smanjiti količinu smanjenja i smanjiti proizvodnju učinkovitosti obrade strojeva.

Therefore, in order to ensure the normal operation of this mechanical processing equipment, the control of cutting vibration has become increasingly important.