Laser cutting machines have very good cutting effects, with obvious advantages in flexible processing compared to traditional cutting, saving time and manpower, and being efficient and high-precision. Karena semakin luas menggunakan mesin memotong laser logam, mereka diterapkan dalam industri seperti proses logam lembar, penerbangan, elektronik, peralatan listrik, dan peralatan dapur. Di bawah, editor akan memperkenalkan bagaimana menggunakan mesin memotong laser untuk mencapai hasil memotong yang baik.

1. The cooling system needs to be grounded, and the water tank and waterway should be cleaned regularly. The temperature control point of the refrigeration temperature control water tank should be fair, otherwise it will cause easy damage to the laser tube, decrease in condensation power, detachment of the cold water head of the tube, greatly shorten the service life, and sometimes fail to work, resulting in continuous tube replacement.

2. The installation support point of the laser tube of the laser cutting machine should be reasonable, and the support point should be at 1/4 of the total length of the laser tube, otherwise it will cause the laser tube spot mode to deteriorate, and some work for a period of time will cause the spot to become several points, resulting in a decrease in laser power that cannot meet the requirements, causing continuous tube replacement.

3. Perlindungan air harus diperiksa dan dibersihkan secara regular. Air pendinginan sering tidak dapat melemparkan tombol perlindungan air float atau tombol perlindungan air float tidak reset. Metode sirkuit pendek tidak harus digunakan untuk memecahkan masalah mendesak.

4. The suction device should be checked and cleaned regularly, and the fan ducts should be cleaned thoroughly Otherwise, a lot of smoke and dust cannot be discharged, severely and quickly polluting the lenses and laser tubes, causing easy oxidation of various mechanical and electronic components and poor contact.

5. Focus lens and reflector inspection, after working for a while, the frame will have a fever, and the surface of the lens will change color and rust; Peeling and cracking are all objects that need to be replaced, especially for many customers who use large air pumps and compressors, which quickly accumulate water on the focusing lens. Therefore, it is necessary to check the cleanliness and quality of the lens optical path system on time.

6. lingkungan kerja mesin memotong laser tidak seharusnya terlalu keras. jika suhu lingkungan lebih dari 30 derajat dan bawah 18 derajat, akan ada terlalu banyak debu dan polusi udara yang berat, yang akan merusak mesin dengan parah dan meningkatkan tingkat kegagalan; Komponen listrik cenderung untuk masalah di lingkungan basah.

The content of the article is sourced from the internet. If you have any questions, please contact me to delete it!