Stamping parts are now widely used in daily life, and they are widely used in machinery, automobiles, communications, high-end electronics, instrumentation, electrical appliances, furniture, and other industries. Stamping parts are mainly formed by stamping sheet metal through stamping process dies. The stamping parts produced by precision stamping parts processing plants have the characteristics of thin, uniform, light, strong, and high precision, and common specifications. So what should be paid attention to when stamping?

1. Stamping parts should be strictly inspected before equipment and use, dirt should be removed, and guide sleeves and dies for drawing stamping parts should be carefully checked for good lubrication. Regularly check the die equipment base of the punch turntable and stamping parts to ensure the coaxial accuracy of the upper and lower turntables.

2. During the stamping process, if you need to make certain adjustments and equipment to the die, you must first close the power supply before acting. Although the power supply can be carried out without closing the power supply, the risk index will be greatly increased. Therefore, for safety, the precision stamping parts processing plant must operate after the power supply is completely closed and the machine stops working. 3. In addition, the presence of fastening screws will have a certain effect on the safety of stamping processing. In order to ensure that this does not become a hidden danger, it is necessary to tighten the fastening screws frequently to ensure that the fastening screws can play a safe role.

4. Equipment protection equipment. Because the production batch is small, in stamping operations that are neither automated nor safe stamping tools, safety protection equipment must be equipped to avoid injuries caused by operation errors. Various protective equipment have their own different characteristics and scope of application, and improper use can still cause injuries. Therefore, it is necessary to understand the effect of various Metal Stamping parts processing protection equipment in order to achieve correct use and ensure safe operation.

5. When the punch and die edges of the stamping parts are worn, the precision stamping parts processing plant should stop using them in time and grind them in time, otherwise it will quickly expand the wear degree of the die edge, accelerate the wear of the die, and reduce the quality of the stamping parts and the life of the die.

This article is from EMAR Mold Co., Ltd. For more EMAR related information, please click: www.sjt-ic.com,