안녕하세요!EMAR 회사 웹 사이트에 오신 것을 환영합니다!
16년 이상 디지털 제어 가공, 금속 프레스, 판금 제조에 집중
독일과 일본의 고정밀 생산 설비와 검측 설비는 금속 부품의 정밀도를 0.003 공차와 고품질로 확보한다
메일박스:
sales8@sjt-ic.com
Let's talk about how precision stamping parts processing plants continue to produce high-quality products
현재 위치: home > 뉴스 > 업계 동향 > Let's talk about how precision stamping parts processing plants continue to produce high-quality products

Let's talk about how precision stamping parts processing plants continue to produce high-quality products

출시 날짜:2025-01-12     검색 횟수 :5


In order to consistently produce good and qualified stamping parts, precision stamping parts processing plants must protect and maintain the stamping parts of stamping parts processing equipment. Mainly include: stamping parts, feed drive organization, guide rails and other parts.

1. Good smoothing effect can reduce the working temperature of the bearing and extend the service life; for this reason, it should be noted in the operation: at low speed, choose grease and oil circulation smooth; at high speed, choose oil mist and oil and gas smoothing method. However, when selecting grease smoothing, the sealing amount of the pressure bearing is generally 10% of the bearing space volume, and the precision stamping parts processing plant must not fill it up at will, because too much grease will increase the pressure and heat generation. For smooth oil circulation, check the pressure smooth constant temperature oil tank every day during operation to see if the oil volume is sufficient. If the oil volume is not good, the smooth oil should be increased in time; at the same time, pay attention to check whether the temperature scale of the smooth oil is appropriate. Lets talk about how precision stamping parts processing plants continue to produce high-quality products(pic1) 2. In order to ensure excellent smoothness in the processing of stamping parts, reduce conflict heat generation, and at the same time take away the heat of pressure components, a circulating smoothing system is generally used, a hydraulic pump is used to supply oil smoothly, and an oil temperature controller is used to control the oil temperature of the tank. High-grade numerical control punching press pressure bearings use a high-quality grease storage method to be smooth, and each addition of grease can be used for 7 to 10 years. The new smooth cooling method not only reduces the temperature rise of the bearing, but also reduces the temperature difference between the inner and outer rings of the bearing to ensure that the pressure heat deformation is small.

This article is from EMAR Mold Co., Ltd. For more EMAR related information, please click: www.sjt-ic.com,