1,What are the techniques for creating metal logo signs with textured graphics and text

1. Panellos metallos fortes cum characteribus convex extruxerunt, utilizantes moldes concave et machinas punching;

2. Panellum metallicum tenum cum convex et concave mollis et stampis ut caracteres convex trahentur;

3. Metodo etching utilizat, ut caracteres convex in steela, platea aluminium aut platea coperis inponet.

2,Label hot stamping equipment and process:

Flat hot stamping, a s the name suggests, refers to the use of a flat mold as the reference surface, which is hot stamped on a flat workpiece or a part of the flat surface of the workpiece (flat hot stamping). Haec tipus impressionis graphic a et textus adflictione potest esse, calidum super flatam superficiem; Est etiam plaga silicona, calma pulsata in graphica et texto elevata.

Carmen et embossatio parte est calide silicone ruber roller qui calidum est super flatam superficiem (rotunda stampio calide) aut super curvatam superficiem (rotunda stampio calide). Si dedicato servo mechanismo equipitus est, etiam calidum circum extremia domorum televisionis et ceteris casings est. Est etiam typus instrumentorum scalding. It is different from the former in that it still uses flat plate hot stamping, and the work piece is cylindrical. When it is hot pressed, it rolls and advances while hot stamping, aching the purpose of hot stamping on the circumferential surface, which is called "flat hot stamping circle". Before the 1980s, hot stamping equipment in China was mostly homemade by hot stamping users. In the early 1980s, most of the imported hot stamping machines were flat and rolling machines from Japan's Taiping (Navidas), West Germany's Kurz, and Hong Kong. After the 1980s, there were gradually more domestic production factories, which have now become a major category of special printing equipment, not only meeting the needs of the domestic market, but also for export.

3,What are the oxidation processes for signs

Exit methods such as rapid oxidation, electrolytic coloring, soaking and trekking printing and dying, low-temperature sealing, electrophoretic painting replacement for the second oxidation, and different oxidation power sources.

4,Printing process for metal logo signs:

1. Screen printing: The text, scale, graphics, positioning holes, and colors of the screen printed label should meet the requirements of the drawing. The appearance of the metal logo label product should have no significant scratches or stains, and the adhesion of the ink film should meet the requirements;

2. Impressio machinae: Impressio colores metallorum est, usando machinas impressionis offset, coloribus splendissimis et effectis gradient is excessimis, facientes diagramas et testos viventes et cogitantes.

5,Precautions for baking paint on metal logo signs:

Pelliculae et medio mundi sunt, effugientes pulverem et etiam dilucionem pingam, et tempus peccationis constituetur.

6,The process of cutting metal logo signs and nameplates:

1

2. Stamping forming bottom layer treatment, high gloss cutting (cold extrusion)

3. Etching convex letting bottom layer treatment, high gloss cutting (etching), high gloss signage

7,There are several electroplating processes for metal logo signs:

Electroplating generally includes gold plating, silver plating, bras plating, antique coper plating, nickel plating, sanda nickel, and two-color gold plating.

Remind everyone to pay attention to the coating time and thickness during electroplating. If the label is too thin, it will directly affect the drawing process. The coating is easily worn off during drawing, which cannot achieve the desired effect and is prone to breakage. There are too many defective products. Control the processing time of plastic parts to avoid corrosion under bubbles in the coating.