Stamping is a metallic processing method that is based on the plastic deformation of metals. It uses molds and stamping equipment to apply pressure to the sheet metal, causing plastic deformation or separation of the sheet metal, thereby obtaining parts (stamped parts) with certain shapes, sizes, and properties.

Producti nostri hardware producti sunt using stamping technology, and there are two forms of stamping for the products: 9312;strip/sheet stamping on stamping 93939313nut;bar stamping

-Strip/Sheet Stamping-

Strip/sheet metallic stamping: mainly for the production of some hollow hardware products and sheet metal parts

Bar Stamping-

Bar stamping: mainly for the production of semi hollow or solid hardware products

Stamping technology has an irreplaceable and indelible position in the automotive manufacturing industry, especially in the case of car body shells, which have large and complex shapes, many curved spaces, and high surface quality requirements. Therefore, using stamping technology to produce these parts is incomparable to other processing techniques.

Proces stampionis in quattuor principibus procedentibus dividetur:

@ 000 Punching-

Punching: a stamping process that separates sheet metal (including punching, cutting, trimming, slicing, etc.)

- Bending-

Bending: The stamping process of bending sheet metal in a certain angle and shape along a bending curve

Deep drawing-

Deep drawing: a stamping process that transforms flat sheet metal into various open hollow parts, or further changes the shape and size of hollow parts

- Forming-

Lokale formatio: procedus stampionis, qui diversa typa deformationum lokalorum utilizat ut cambiat formam partee vacuum aut stampionis (includit flanging, bulging, leveling, et shaping processes, etc.)

Characteristics of stamping process:

Stamping is a processing method with high production efficiency and low material consumption

2. Partibus stabilis generalmente non require further mechanical processing and have high dimensional accuracy

3. Convenientes operationes

4. Partibus pulsavis habent bonam interchangeabilitatem

5

6. Stamping processing can obtain parts with high strength, high rigidity, and light weight

7. Able to manufacture complex shaped parts that are difficult to process using other metal processing methods

8. Stamped products have good surface quality, providing convenient product recommendations for later surface treatment processes such as electroplating and polishing

/Product recommendation/

Nomen produkti: Rivet/Rivet

Model: RT312

Dimensio: φ 3.80 x H10.10 (mm)

Nomen produkti: Rivet/Rivet

Model: RT910

Dimensia: φ 5.05 x H13.20 (mm)

Product Name: Hole Cover/CAP

Model: CA220

Dimensio: φ 63.00 x H20.70 (mm)

Nomen produkti: Button Eye/EYELET

Model: ET256

Dimensio: φ 9.55 x H11.55 (mm)

Nomen produkti: Button Eye/EYELET

Model: ET436

Dimensio: φ 25.40 x H6.55 (mm)

Nomen produtus: Base/BASE

Model: BE197

Dimensio: φ 20.00 x H6.25 (mm)

PS: Si magis de produktis nostris discere vis, contacta nos, quaeso.

-

Superiora est unus de tecnologiis processionis metallorum que hodie vobiscum partem faciemus - tecnologia stampionis metallorum. Speramus ut utile esset tibi produktios in eadem technologiam intellegere.