Post installationem instrumentorum, centro machinarum 850 oportet alignationem instrumentorum ut determinaret positionem initii ante executationem programam machinarum. However, tool adjustment is a often a headache for operators, which is time-consuming and labor-intensive, especially when processing multiple tools, and requires measuring the tool compensation value. EMAR has multiple high-precision 850 series CNC Machining centers and shares common tool alignment methods with you, mainly including:

1,Using self-made knife block method

A simple tool block made of plastic, organic glass, etc. can easily achieve repeated positioning of the tool after grinding, but the positioning accuracy is poor, usually between 0.2-0.5mm. However, it is still a fast positioning method and can be easily adjusted again.

2,Point to move knife technique

Press and hold the jog key on the control panel of the 850 machining center, lightly touch the surface of the workpiece with the tip of the tool, reset the counter, then return to the desired initial position, reset again, and obtain the initial position of the tool. Determine initial position of each knife in sequence, and adjust it to the accurate design position after trial processing.

3,Using CNC cutting tools

Post initium positionem installationis 850 machining center instrumenti accipit post temporem cutationis et accipiens requirit. Posicio tipicionis instrumenti mutat cum reinstallatur instrumentum regulam post sharpening, et necesse est re alignetur.

The 850 machining center adopts the tool preseter method. The tool preseter selected for the machine tool has a self-test device, but the operation is complex and still requires a certain amount of preparation time. Sufficiens pro uso in multis measurementibus bladiis.