Methodus installation is semiconductoris cabinetis non difficilis est, sed adhuc sunt aliquid detalios qui oportet cognoscere. Multi amici pluribus detalios peterunt, ergo summarisamus illos simul in hoc problema.

1,Installation instructions for semiconductor cabinet:

Sequentes precautiones in instauratione semiconductorium cabinetorum accipientur:

1. Examine apparatum equipentis cum dimensionibus relevantibus cabineti ut certem quod coniunctum est ad brachium electum. The protective rubber pads must be securely installed, so please confirm the tools used to remove equipment such as lifting doors and handcarts. Okay, there are wheels under the cabinet, just put that device in and push the cabinet to the appropriate place.

2. Mescit, quaeso, granditudinem cubiculi et altitudinem plateae et ostium et elevatorem per quas transierunt kabinetae. In addition, considering various devices in the cabinet, please place the cabinet near the power supply, network cable sockets and communication outlets.

3. When opening and closing cabinets, confirm the angle at which the cabinet door opens. The standard cabinet door opens a right side and the central axis opens a left side, although the opposite cannot be ruled out. Omnes ostia et latera panes facile sunt aperire ad servandum. Visus verticalis esse debet, superficie cabinetae horizontale tenere debet, deviatio verticala minus quam 1%, deviatio horizontale minus quam 3 millimetri esse debet, spatio inter cabinetes minus quam 1 millimetri esse debet, superficie cabinetae intacta esse debet, scintia firma esse debet, et gravitate superficie per metrum quadraticum minus quam 1 millimetri esse debet.

4. Installantes equipamenta cabinetis in grupo cabinetis existente, iuxta cabinetes securitatem et munditatem regis potestis. Aliquid grupae fictilium cabinet propter diversa causa addere non possunt, aut aliquid adhesiones addere potest. Model bona cabinet grupae sufficient scalabilitatem habere et omnem opus hardware. Remove the side panel of the cabinet and connect it together with screws to form a row.

2,Installatione steps for semiconductor cabinet:

Equatoria computatorium opus est, et cabinetae unum de principibus equipentibus sunt.

The commonly used 19 inch (standard 600mm) heights are 42U, 37U, and 32U respectively.

27U, depth 1000mm, 900cm, 800mm, 600mm.

1,Installation of semiconductor cabinet

Instrumenta habitantia necessaria est, et cabinetae unum de principibus equipis sunt. 19 inches usus (standard 600mm) altitudo 42U sunt. 37U est. 32U est. 27U. Si profunditate est 1000 mm, 900 cm, 800 mm, aut 600 mm, exemplum installation is cabinetae est sicut:

2,Semiconductor Cabinet Installation Plan

Pro plantando spatio disponibile pro frigido et arma maintenantia ante instaurationem cabineti distancia inter fronte et retro cabineti et parietem aut aliam armamenta minus quam 1 metro esse, et altitudo rete cubiculi computatorii minus quam 2,5 metri esse debet.

(1) Inner wall or reference object

(2) Rear of cabinet

(3) Cabinet outline

3,Preparation work before installation

Ante installatio, basem in loco rectum est. Alioquin redactio potest occurrere.

Disassemble the cabinet and cabinet accessory packaging wooden box according to the packaging box instructions.

4,Cabinet installation

1. Processus Installationis.

Fixing the cabinet on the cabinet mounting base allows for direct installation of cabinet accessories.

2. Posicio Cabineti.

Pone cabinetum in loco plantatum, inspice fronte et retro cabineti, et aligne pedes areae cabineti in correspondentibus signis positionis areae.

(1) Cabinet bottom frame (2) Cabinet locking nut (3) Cabinet bottom bracket (4) Pressure plate locking nut

Metodo identificationis ante et retro cabinet is: later cabinetis retro cabinetis est.

3. Cabinet level adjustment.

Pone principem horizontalem in duobus directionibus perpendicularibus super avionem superioris cabinetis ut videret levitatem suam. Use a wrench to turn the screws on the feet, adjust the height of the cabinet to make it level, and then lock the locking nut at the bottom of the cabinet so that it fully aligned with the bottom plane of the cabinet.