Batch processing of parts in the processing profession can better demonstrate processing advantages, one of which is power. As the primary goal of processing batch parts is to save time, increasing power can reduce many costs. More importantly, it can save time. In general, the power of batch parts processed by three-axis machines is relatively low. The primary requirement is to clamp the parts multiple times. If the parts have four sides, i then the entire workpiece needs to be machined on six sides and clamped six times without increasing the processing power. It takes a lot of time in clamping and also requires more machines to distribute the processing of multiple sides. Si necesse est fixturas facere ut auxiliatur in processione ex latere difficile procedere, excessive costas et consummatio potentiae incipiet, quod non est ideal. And the five axis linkage machining has improved many problems. First of all, in terms of power, the five axis CNC Machining clamping does not require so much effort. Only one clamping is needed to complete the machining of multiple surfaces, i which improves power and reduces the pressure on NC on-site clamping. It also reduces the time and cost of doing fixture assisted machining. Generally, three-axis machine tools require six clamping times to complete the machining of workpieces. Five axis machine tools only need two clamping times to complete the machining of the entire workpiece.

So in terms of power, the five axes have a great advantage, followed by quality. The most important thing for batch parts is to ensure quality while ensuring power. Due quality issues, the entire batch of workpieces can be repaired, and in severe cases, the entire batch may even be scrapped. Hic, antequam maiusculatur potestatem, priorum priorum est ad optimum qualitatem secundum optimum.multo diminuit in processione laterum superficium. In multis structuris complexis, quae tres axis machinari non possunt, quinque axes secundum angulos mutationem, costas reducentes et qualitatem opus assecurare possunt.