Stamping is a metal processing method that is established on the basis of plastic deformation of metal. It uses molds and stamping equipment to apply pressure to the sheet metal, causing plastic deformation or separation of the sheet metal, thereby obtaining parts (stamped parts) with certain shape, size, and performance.

Our small hardware products are produced using stamping technology, and there are two forms of product stamping: ① strip/sheet stamping ② bar stamping

-Strip/sheet stamping-

Strip/sheet metallic stamping: mainly aimed at the production of some hollow hardware products and sheet metal parts

- Bar stamping-

Bar stamping: mainly aimed at the production of semi hollow or solid hardware products

Stamping technology plays an irreplaceable role in the automotive manufacturing industry, especially for the large and complex shape of car body shells, with multiple curved surfaces and high surface quality requirements. Therefore, using stamping technology to produce these parts is incomparable to other processing methods.

Proces stampionis in quattuor principibus procedentibus dividetur:

- Punching and cutting-

Punching: a stamping process that separates sheet metal (including punching, cutting, trimming, and sectioning)

-Bending-

Bending: The stamping process of bending a sheet metal in a certain angle and shape along the bending curve

-Deep drawing-

Deep drawing: a stamping process that transforms flat sheet metal into various open hollow parts, or further changes the shape and size of hollow parts

- Forming-

Partial forming: a stamping process that uses various local deformations with different properties to change the shape of a blank or stamped part (including flanging, bulging, leveling, and shaping processes)

Characteristicas tecnologiae stampionis:

Stamping is a processing method with high production efficiency and low material consumption

2. Partibus stabilis generalmente non require further mechanical processing and have high dimensional accuracy

3. Convenientes operationes

4. Partibus pulsavis habent bonam interchangeabilitatem

5. Low cost of stamping parts produced in bulk using molds

6. Parts with high strength, high stiffness, and light weight that can be obtained through stamping processing

7. Can manufacture complex shaped parts that are difficult to machine using other metal processing methods

8. The surface quality of the stamped product is good, providing convenient product recommendations for later surface treatment processes such as electroplating and polishing

/Product recommendations/

Nomen produtus: Rivet/RIVET

Model: RT312

Dimensio: φ 3.80 x H10.10 (mm)

Nomen produtus: Rivet/RIVET

Model: RT910

Dimensio: φ 5.05 x H13.20 (mm)

Product name: Hole cover/CAP

Model: CA220

Dimensio: φ 63.00 x H20.70 (mm)

Nomen produtus: buttonhole/EYELET

Model: ET256

Dimensio: φ 9.55 x H11.55 (mm)

Nomen produtus: buttonhole/EYELET

Model: ET436

Dimensio: φ 25.40 x H6.55 (mm)

Product name: Base/BASE

Model: BE197

Dimensio: φ 20.00 x H6.25 (mm)

PS: If you would like to learn more product information, please contact us

-

Altissimus est unus de technicis processamenti metallorum qui hodie vobiscum partemus - tecnologia stampionis metallorum. Speramus ut utile esset tibi intellegere produktos eiusdem processi.