Sehemu za usafiri ni bidhaa zenye mahitaji ya kiwango kikubwa na vigumu vya kutengeneza vifaa vya anga vinahitaji kuwa vizuri, kwa sababu wanahusisha sababu mbalimbali kama shinikizo, joto na upinzani hewani. Inahitaji kuhakikisha kwamba hakuna matatizo yanatokea wakati wa matumizi. Kwa hiyo ni muhimu kutumia vifaa vizuri kwa ajili ya kuchukua hatua kabla ya kuchukua hatua.

Ni lazima kuwa tahadhari na usikilize maelezo wakati wa upasuaji. Kama sehemu kama hizi haziwezi kubadilishwa, kama wanakubaliwa, inaweza kusababisha matatizo wakati wa matumizi. Kwa hiyo, tahadhari ni lazima kupewa taarifa wakati wa upasuaji ili kuepuka hali ya kawaida ambayo inaweza kutokea wakati wa upasuaji na haiwezi kubadilishwa. When getting on and off the machine, it is also important to be careful not to collide and ensure that the workpiece is undamaged. When processing precision, it is important to be careful and ensure accuracy to prevent any problems during use. Processing on the five axis can reduce the number of clamping times for aviation parts and increase the power of the working hours. If there are many flips, the error of each surface can be reduced on the five axis, and only one clamping is required to complete the processing of five surfaces on the five axis. Ni muhimu kuelewa kwamba hakuna vyanzo vya vurugu karibu na vifaa vya mashine, vinginevyo inaweza kuathiri utulivu wakati wa vifaa mitano.