The design of Metal Stamping parts determines the utilization rate of raw materials in the later stage, so a reasonable stamping part design is very necessary for stamping processing plants. Yiwei Precision - dedicated to customized stamping parts processing for over 10 years, has accumulated rich experience in stamping parts processing. Next, let's take a look at how the structure of the stamped parts can be reasonable.

1. Reasonable shape of stamped parts

Based on the discussion and layout of stamping parts structure in the SE engineering project, efforts should be made to improve the material utilization rate of each stamping part. Products with special design have low material utilization rate, while those with conventional design have high material utilization rate. Therefore, the effective shape design and construction of stamping parts are crucial, which will also affect the manufacturing cost of stamping factories.

2. Reasonable division of stamping parts

Based on discussions with the development and design unit, in the early design of stamping parts, it is recommended to consider the characteristics of the stamping parts and strive for a reasonable structure to achieve a high material utilization rate of the parts. The protrusions on both sides of the stamped part are not conducive to the formulation of the mold process in the middle and later stages, and can also affect the material utilization rate.

That's all for sharing the above content. If you want to learn more about stamping parts processing, please follow us. Zhejiang Yiwei Precision, located in Huzhou, Zhejiang, is a manufacturer of precision metal stamping, stretching molding, and precision injection molding.