There are a large number of Sheet Metal Processing enterprises in China. With the continuous development of the sheet metal processing industry, competition within the industry will gradually become more intense in the future. Due to differences in sheet metal technology, processing equipment, and customer needs, sheet metal processing products vary greatly in structure and materials. Follow sheet metal cabinet processing manufacturers to learn about the different classifications of sheet metal processing? 1、 The materials processed are divided into cold-rolled sheet, galvanized sheet, copper, stainless steel (mirror, brushed surface, matte surface), carbon steel, and so on according to different sheet metal processing materials. 2、 Electronic devices with different thicknesses of processing materials adopt different thickness standards. Generally, the installation plates inside the cabinets of distribution cabinets and cabinets cannot be less than 2.5mm, while the standard for outdoor cabinets is generally not less than 1.5mm. 3、 The purpose of the product varies depending on its function, and the materials selected are also different. Generally, the consideration is based on the purpose and cost of the product. For example, electronic devices are generally made of 304 stainless steel, while some outdoor cabinets are mainly designed for appearance, brackets, and door panels. The side panels are made of 304 stainless steel, and aluminum zinc plates are installed inside; In the field of automation, equipment usually uses SPCC cold plates and undergoes surface spraying; Copper bars are mainly used as conductive media for distribution cabinets, while galvanized sheets are used to make reinforcing ribs, partitions, and cable trays. The thickness range of raw materials generally used is between 0.2-5.0mm, depending on customer needs. The above is a summary of the classification of sheet metal processing by sheet metal cabinet processing manufacturers. We hope it is helpful to you!