To open a stamping processing factory, it is necessary to have knowledge of many skills in processing. Firstly, how are stamping molds manufactured? How to repair a broken mold? These are all tasks that demand manufacturers to grasp.

The manufacturing of stamping molds first involves cutting the material before proceeding to the next step of processing. Cutting is rough machining, where a template needs to be roughly flattened by a planer, then roughly ground and processed by a grinder to leave a certain margin. If heat treatment is required, the precision is required to be high when processed by a large grinder. For example, if the thickness of the template is 25mm, the precision requirement must be within plus or minus 0.01mm; Usually, there is not much connection with just one or two lines. After the grinding machine is processed, the threading holes, wire cutting, milling machines, CNC machines, etc. are placed;

Manufacturing a set of stamping molds requires a lot of processing equipment, generally including planers, lathes, drilling machines, grinders, etc., all of which require skilled mold fitters to master. During the use of stamping molds, improper operation and other reasons can cause damage to the molds. Therefore, manufacturers also need to master the skills and knowledge of mold repair and be familiar with the operating principles of various molds. What are the primary things that need to be repaired when repairing molds? Stamping parts processing manufacturers take a look:

Repair wherever it breaks, such as not removing the material, or if the tension spring is not strong enough to hit, or if the planning of the detached parts is unreasonable. At this moment, it may be necessary to replace or add tension springs, improve the detachment structure, increase the top material pin, etc. Then it may be necessary to use drilling machines or milling machines to drill countersunk heads, or it may be necessary to use welding, etc. Then it is also necessary to operate argon arc welding machines and personnel who can burn argon arc welding. After burning, there may be grinding, milling, etc.

So the skills required for stamping die fitters and repair personnel include:

1. Familiar with the operating principles of various molds;

2. Proficient in operating grinding machines, milling machines, drilling machines, and argon arc welding, and able to investigate whether the processed stamped parts meet the precision requirements of the mold;

3. Understand what discharge, wire cutting, CNC are, etc.

After becoming familiar with and mastering the operating principles of these molds, almost all the problems presented can be handled well.

This article is from EMAR Mold Co., Ltd. For more EMAR related information, please click on www.sjt-ic.com,