Before processing stamping parts in stamping factories, it is necessary to brush the stamping mold and stamping material with oil in order to improve the working conditions of the mold, reduce the friction coefficient between the stamping material and the mold, increase the degree of material deformation, protect the surface of the mold, extend the service life of the mold, prevent scratches on the surface of the parts, and improve the quality of the stamping surface.

Lubrication is required for sheet metal and stamping molds for drawn parts, formed parts, and medium thick plate stamping parts; When applying lubricating oil, it is necessary to use specialized tools such as rollers or brushes for correction; After the drum and brush are coated with oil, they need to be rolled twice on the grate and evenly brushed on the corners of the mold cavity and the areas where the pressing surface touches the sheet metal;

Lubrication tools and oil containers should be kept clean and regularly cleaned. When processing stamped parts, they should be inspected in advance to avoid excessive consumption of lubricating oil and environmental pollution.

This article is from EMAR Mold Co., Ltd. For more EMAR related information, please click on www.sjt-ic.com,