Stamping workers should receive prior training on the application of common sense to stamping parts molds before starting work. After passing the training, they can be arranged to work. Stamping parts molds must be inspected and maintained during use, as the quality of the molds directly affects the production efficiency and product quality of Metal Stamping parts.

1. Before debugging and starting up the mold, it is necessary to check whether there are any foreign objects inside and outside, and whether the sheet metal to be stamped is clean and tidy;

2. During the use of metal stamping molds, it is necessary to strictly follow the operating standards and prevent situations such as disorderly placement and collision; In the processing of stamping parts, the working status of the mold should be checked at all times. If any abnormal conditions are found, the machine must be stopped for inspection. Only after everything is normal can it continue to be used;

4. Regularly lubricate the working surface and movable mating surface of the metal stamping die, and add lubricating oil;

5. Clean and wipe the waste residue inside the installation surface and mold cavity surface of the upper and lower templates with an air gun for every 50 pieces of small punch and every 30 pieces of large punch; Regularly remove waste materials, etc;

6. Stamping molds also need regular maintenance to improve their service life.

This article is from EMAR Mold Co., Ltd. For more EMAR related information, please click on www.sjt-ic.com,