In the production process of stamping parts, forging press is an essential equipment. The seemingly simple machine has many noteworthy aspects in operation, and the quality of stamping parts is linked to the standardization of the operating process. After the acquisition of metal raw materials, it is the initial processing of forging presses. How to operate safely when processing precision stamping parts? Firstly, it is the safety operation of standard stamping workers to clarify the job standards for their positions. The homework process is as follows:

1. The green light on the photoelectric control box is normal;

2. Place your hands in the photoelectric protection zone and check if the control box is lit with a red light;

3. During the operation of the machine, press the emergency stop switch to see if the machine can stop safely; When there are debris inside the mold that needs to be sorted, the emergency stop switch must be pressed and the selection switch must be adjusted to "cut" before sorting;

5. Use the synchronization button with both hands for all tasks;

6. When the machine is working, no part of the body is allowed to be between the upper and lower molds;

7. Use safe one stroke operation during single stroke operation; Stop using inching and one stroke operations;

8. If there are abnormalities in the machine or mold, report them in a timely manner and do not handle them privately.

The above is the operation process of forging press in precision stamping parts processing, which plays a very good role in ensuring daily safety work.

This article is from EMAR Mold Co., Ltd. For more EMAR related information, please click on www.sjt-ic.com,