Hardware stamping manufacturers are capable of cold stamping various metal materials for stamping parts, but often have to consider many issues during the manufacturing process. Do you know what factors should be considered when designing stamping processes? Let's take a look together below.

Firstly, when the cross-sectional quality and dimensional accuracy requirements of Metal Stamping parts are high, it is necessary for metal stamping manufacturers to consider precision machining after punching or directly adopt precision punching technology. Secondly, in order to improve the stability of the stamping process and ensure the quality of the stamped parts, hardware stamping manufacturers need to increase the number of processes. The processing quantity of bent parts mainly depends on the complexity of their structural shape. When the bending radius of the bent part is less than the allowable value, it depends on the number of bending angles, relative positions, and bending directions. After bending, hardware stamping manufacturers need to increase precision machining processes. The fourth is that the number of deep drawing workers is related to material properties, deep drawing height, deep drawing step length, deep drawing diameter, and material thickness. When the corner radius of the deep drawing part is small or the dimensional accuracy is high, it can be determined through deep drawing process calculation. After deep drawing, the hardware stamping manufacturer should add a trimming process. The fifth is for metal stamping parts with simple shapes. Due to limitations in mold structure or strength, single process molds are used for cutting. For workpieces with complex cutting shapes, the upper and lower contours should be divided into several parts. Hardware stamping manufacturers can use various stamping processes when necessary. For metal stamping parts with high flatness requirements, continuous methods can be selected, and a leveling process can be added after cutting. The above are the points that metal stamping manufacturers need to pay attention to when producing stamping parts. For stamping parts with high production process requirements, metal stamping manufacturers need to focus on each process in order to produce high-quality stamping parts.