The operation of machine tools is one of the important measures to ensure the safe operation of CNC machine tools. Operators must strictly follow the operating procedures to ensure the safety of personnel and the smooth operation of machine tools.

The following points should be noted in the operating procedure of the mind machine:

In the operating program, the order of startup and shutdown should be clearly defined, and precautions should be taken.

Before starting the walking machine, please carefully read the warning signs on the machine and strictly follow them.

During the operation of the walking machine, the operator shall not open or close the electrical cabinet door at will;

When moving each axis, please pay attention to the collision between the tool and the workpiece.

5. Pay attention to the axis sequence during tool movement when programming.

6. The shaft wear compensation of each machine tool is different, and replacing the tool must return to a safe distance.

7. Before replacing the processing material, it is necessary to check the diameter of the material to prevent it from getting stuck or colliding due to excessive diameter (clamp).

When the feeding equipment is in manual mode or using a simple feeder, it is necessary to check whether the material is long enough to prevent collisions due to insufficient material.

During the operation of the CNC walking machine, do not modify parameters arbitrarily;

10. When the machine is running normally, it is forbidden to press the following buttons: emergency stop switch, reset switch, etc.

After power failure and restart, it is necessary to manually or MDI mode move each axis to the machining point, otherwise it may crash.