Surface processing method of hardware parts after machining with five axis CNC machining center

To improve work efficiency and safety,

1. Oxidation processing

When producing hardware products (mainly aluminum parts), oxidation processing is used to harden the surface of the hardware products, making them less susceptible to wear and tear.

2. Spray painting processing

When producing large hardware products, spray painting is used to prevent rusting, such as daily necessities, electrical casings, handicrafts, etc.

Stainless steel five axis machining center

3. Electroplating

Electroplating is also a common processing technique in five axis machining. Through modern technology skills, the surface of hardware parts is electroplated to ensure that the product does not mold or embroider after long-term use. Common electroplating processes include screws, stamped parts, battery cells, car parts, and small accessories.

4. Surface polishing processing

Surface polishing processing is generally used for a long time in daily necessities, after deburring the surface of hardware products.

The machining method for the surface of five axis CNC Machining parts depends first on the skill requirements for machining the surface. However, it should be noted that these skill requirements may not necessarily be the requirements specified in the part drawing, and sometimes may be higher than the requirements on the part drawing due to process reasons. If the machining requirements for the appearance of certain five axis CNC machined parts are increased due to the non coincidence of the reference, or if higher machining requirements may be imposed on them because they are used as precision references. Reduce the risk of working at heights.