Numerical control five-axis machining center is an advanced machining equipment with high precision, high efficiency and high flexibility. It is a special equipment for machining complex curved surfaces, including five rotating axes such as X-axis, Y-axis, Z-axis, A-axis and C-axis. When operating numerical control five-axis machining center, the following specifications and requirements need to be paid attention to: Familiar with the operation: Operators need to be proficient in the performance and characteristics of the machine, including the use of various switch buttons, and how to use the stop switch button in emergency situations, etc. Safety precautions: Operators must wear good labor protective gear, prohibit wearing gloves to operate, and avoid accidents such as machine hooking gloves. Workpiece placement: When the workpiece is up and down, it is necessary to stop the operation of the five-axis equipment first. Avoid opening the front door or left and right protective cover during the operation of the machine to avoid personnel injury. Inspection and maintenance: Before each operation, check the tool and fixture to confirm its stability, clean the equipment, and avoid dust and foreign objects from entering the equipment. Tool adjustment: Adjust the tool length as needed to ensure the accuracy of the machining depth. Material preparation: Select high-quality materials to ensure the quality and efficiency of processing, and the material should be placed in a constant temperature environment to adjust its temperature. Cutting parameter setting: Reasonably set the cutting parameters according to the hardness of the material to ensure the processing effect. Real-time monitoring: By monitoring the processing process in real time, problems can be found and dealt with in a timely manner. Finish work: Before finishing work and leaving the five-axis machining center, cut off the control power supply and main switch of the operation panel. Please note that these specifications are for reference only, and it is recommended that you operate according to the operation manual of the machine.