How can Sheet Metal Processing prevent corrosion during operation? The editor of sheet metal processing company will answer your questions.

After the production of sheet metal chassis cabinets, there will be some post-production problems, such as resonance during operation, dust in the air, etc., which will cause certain harm to sheet metal chassis cabinets. So how to improve and prevent these problems?

Sheet metal processing first depends on how the sheet metal chassis cabinet prevents resonance. Sheet metal chassis cabinets will generate a certain sensation during operation, and long-term resonance will cause certain harm to mechanical equipment. Therefore, in the face of such a sensation, it is necessary to install a shock absorber during sheet metal processing, and there is no resonance expansion phenomenon at all in the range of 10~ 2000Hz after installation. Although there is an irregular peak at about 200Hz, the sheet metal chassis cabinet has resonance expansion, but the time is very short, the transmission speed is fast and reduced, and it has little impact on the cabinet. As for the chassis cabinet, cracks need to be detected after leaving the factory, and the connection cannot be loosened. By strengthening the cabinet planning, selecting a reasonable vibration isolation system, and then conducting tests and verification, the sheet metal cabinet can meet the application requirements of the airborne environment. With the discussion and application of new vibration isolation technology for sheet metal processing, as well as the continuous improvement of dynamic testing technology and the improvement of vibration analysis level, vibration isolation planning methods will become more and more abundant and perfect.

Sheet metal processing No matter what kind of chassis sheet metal processing is exposed to the air for a long time, it will be infected with dust, and oxidation may occur, making it less bright. Do we have a way to deal with this situation of sheet metal chassis? The simple way to maintain a sheet metal chassis is to clean it.

1. First, it is necessary to rinse the appearance of the sheet metal chassis with water and remove the external dirt.

2. Then participate in Fanjian, and the liquid detergent may be 5% ammonia solution for scrubbing.

3. Rinse carefully with water.

4. After ZUI, we dry the remaining water stains outside the chassis cabinet. During the drying process, in order to be cleaner, we should scrub in the same direction. After scrubbing, we can let its appearance dry naturally.

5. Although the aging of the sheet metal chassis is an irreversible operation, after regular cleaning, we can delay this aging. Adhering to the cleaning state of the sheet metal chassis is also conducive to its high working state. If the chassis cabinet is properly processed and maintained, it can prolong the service life and reduce production costs.