When a CNC Machining center collides, it will affect the performance of the machine tool and the progress of the machining task. When a collision occurs, the workpiece will be scrapped, and the spindle will be affected, which will seriously endanger the service life of the machining center. When many novices operate the machine, collisions are difficult to avoid. However, if we use the correct processing methods, we can try to avoid collisions. On the side, is it really difficult to prevent collisions? Of course not. In fact, many CNC machining centers are designed with their own anti-collision machine functions. Shenzhen EMAR Precision Technology has 18 years of experience in CNC machining. Let‘s explore for you the anti-collision machine functions that come with CNC machining centers. Let‘s see what‘s going on.

　　In the current CNC machining center operation, there is basically a "single-stage fulfillment" -SigleBlock function, which can determine whether the operator has the opportunity to stop when an error occurs. Before the processing order is "started in a cycle", we must first determine whether the next action of the machine is exactly the same as our expectations. If you are not sure that the machine will perform aesthetic actions next, then it is best not to press the "cycle start" button to avoid unnecessary processing waste in the case of uncertain processing procedures.

　　The "single-segment fulfillment" function is an important part of this rule. In the case of program changes, tool replacements, coordinate system changes, etc., this function will effectively reduce the collision results caused by mistakes.

　　The "single-segment fulfillment" function is a very important part of this rule. In the case of program changes, tool replacements, and coordinate system changes, this function will effectively reduce the collision caused by mistakes. In daily processing, after the programmer has written the program, the operator needs to proceed to the next step according to the tool list and program list.

　　Programmers need to imitate the processing conditions as early as possible, and find some risks in the processing this morning. After getting the post-processing procedures, they need to check again. Unapproved processing procedures for operators will affect mutual trust, causing psychological pressure on both parties, and cannot effectively avoid collisions. Secondly, continuous training for operators and engineers to minimize the occurrence of collisions is something that needs to be paid attention to by enterprises.

　　Shenzhen EMAR Precision Technology Co., Ltd. was established in 2001, the company has developed so far, with a center-type numerical control lathe, tool-type numerical control lathe, turning and milling composite machining center and cnc machining center more than 100 sets, to meet the medical, optical, communications, optoelectronics, drone, intelligent machine, aviation, automotive parts and office automation parts custom processing and mass production, at the same time, we have summarized a lot of technical knowledge about cnc processing, welcome to pay attention to EMAR Precision Technology.