In today‘s era, all walks of life are constantly competing. Nowadays, many stamping processing plants are facing the crisis of customer price reduction. And reducing costs has become a huge problem that factories continue to solve. So how can stamping processing plants reasonably reduce stamping processing costs?

1. The stamping process should be selected well

Before the production of Metal Stamping parts, it is necessary to develop a perfect stamping process. Only a reasonable stamping process can ensure that there are fewer defects and fewer waste products in the actual production process, and at the same time, it can greatly increase the output value of the product.

2. Good stamping die

Metal stamping parts are directly processed and produced by stamping dies, so it is necessary to ensure the quality of the dies, especially when it comes to large-scale production of metal stamping parts, the quality of the dies greatly affects the cost of metal stamping parts.

In addition, the stamping plant must minimize the production process of the product under reasonable circumstances. 3. Select automated production

Nowadays, the cost of metal stamping parts, especially electronic stamping parts with relatively small components, often accounts for the largest proportion of labor costs. Therefore, it is imperative to promote stamping automation.

4. Try to choose a continuous die

If you want to promote automated stamping processing plants, it is best to use continuous stamping dies, but even if manual stamping is used, for some products, simple continuous dies should be considered when possible.

5. Rational use of materials

For products with low requirements, the leftovers can be fully used for production. For products with high requirements, materials should also be fully used in planning and discharging to reduce the proportion of waste.

Of course, to reduce the cost of metal stamping parts, each stamping processing plant has its own set of ideas and plans. For different products, it is also necessary to analyze the specific situation, but in the end, it is still based on these five aspects.

This article is from EMAR Mold Co., Ltd. For more EMAR related information, please click: www.sjt-ic.com!