It is often heard that personnel complain that stamping workers cannot be recruited. For some stamping processing plants, the work difficulty of stamping workers is not very high, but it is difficult to recruit people. Why? Mainly because of the repeated occurrence of stamping injuries, people subconsciously believe that stamping is a high-risk job. But why do stamping injuries happen so often? How can stamping processing plants reduce the occurrence of this incident?

1. The punch runs well

An outstanding press is the foundation for safe production. Stamping plants must pay attention to the lubrication of the press to be normal; the copper tile should not be worn excessively; the brake should be tight within the normal range; the clutch and control system should be operated flexibly; and the bolts in various parts should not be loose.

2. Installation of safety grating

After installing the safety grating, if the stamper‘s hands or other items that affect safety enter the risk area, the punch will be shut down immediately; in the shutdown state, the punch cannot be started.

3. Reasonable switch planning

It is necessary to plan two start switches and an urgent stop switch, and the two start switches must also be spaced at a certain distance. Only when the stamper presses the two start switches together can the engine be operated; the urgent stop switch cannot be too far away from the stamper, otherwise when the situation arises, the worker cannot stop the punch at the first time.

4. Stamping die planning is reasonable

If the punch is the first element of safe production, then the stamping die is the second element. The occurrence of stamping parts relies on the stamping die, so the reasonable planning of the stamping die plays a crucial role in safety.

Whether the discharge is convenient and whether the return is smooth all affect the safety of the stamping processing plant during operation. When planning the die, it is necessary to ensure that the stamping processing plant can easily use things to discharge and unload.

5. Reasonable noise reduction measures

Under the influence of punching machine noise for a long time, the concentration and mental state of the factory will continue to decline. Reasonable noise reduction measures can not only ensure the mental state of the stamping workers, but also be responsible for the health of the workers!

6. Establish a safety management system and press operation manual

It is necessary for the stamping processing plant to conduct safety training for the stamping workers from time to time, so that the concept of safe production can be deeply rooted in the hearts of the people. Assist the stamping workers to establish safe operating habits.

As long as the factory pays attention to these problems in daily production, the occurrence of stamping injuries can be avoided to the greatest extent possible.

This article is from EMAR Mold Co., Ltd. For more EMAR related information, please click: www.sjt-ic.com!