Stamping parts is a production technology that relies on the power of conventional or special stamping equipment to directly deform the sheet metal in the die and deform it, so as to obtain a certain shape, size and performance of the product parts. Sheet metal, die and equipment are the three elements of stamping processing. Stamping processing is a metal cold deformation processing method. Therefore, it is called cold stamping or sheet Metal Stamping, referred to as stamping.

What are the methods for deburring stamping parts?

1. The burrs on the holes of the stamping parts can be removed by using a chamfering knife or a shallow drill at the front end of a larger diameter drill bit;

2. The burr on the edge of the stamping part can be directly ground with a file, oilstone, sandpaper, whetstone, etc.;

3. The welding slag on the stamping parts can be removed with a special vibration slag removal tool;

4. The burrs on the outer circle of the stamping part can be chamfered and removed directly on the lathe during the stamping process;

5. For more complex special-shaped stamping parts, electrochemical methods are used to remove burrs

6. In addition to the above methods, there are many ways for stamping parts manufacturers to remove burrs from stamping parts, such as vibration polishing, grinding or shot peening, or adding various shapes of gun heads to the air gun to remove burrs, etc.

The above is the method that affects the deburring of stamping parts explained by our company. If you need to know the little knowledge of other stamping parts, please continue to pay attention to us. We will explain it to you from time to time. Our factory produces stamping parts, automotive stamping parts, metal stamping parts, etc. all year round. We have rich production experience and welcome to consult.