CNC lathe processing EMAR describes the machine tools that have requirements for those aspects of the workshop. CNC is also known as computer gong, numerical control machine tool, etc., which is actually the name of Hong Kong. Later, it was introduced to the Pearl River Delta in mainland China. It is a new processing technology. The main work is to make processing procedures. Of course, it also requires a certain amount of manual processing experience. So what are the requirements for the workshop for CNC processing machine tools? mTk Hardware Factory, Hardware Products, Metal Products, Precision Sheet Metal, Hardware Processing, Sheet Metal Factory, Metal Stamping, Hardware Processing, CNC

　　1. Installation position requirements: The installation position of the numerical control machine tool should be far away from the vibration source, avoid the influence of direct sunlight and heat radiation, and avoid the influence of moisture and airflow. If there is a vibration source near the machine tool, the anti-vibration groove should be set around the machine tool. Otherwise, it will directly affect the processing accuracy and stability of the machine tool, and the electronic components will be in poor contact and malfunction, which will affect the reliability of the cnc processing machine tool. Conditional enterprises try to put the use of numerical control machine tools in an air-conditioned environment to maintain a certain room temperature. The more expensive the machine tool, the more it should be used in an air-conditioned room to avoid unnecessary loss of accuracy. 2. Temperature requirements: Due to the large differences between the north and south regions of China, the machine tool has higher requirements for the ambient temperature. Generally, an exhaust fan and a cooling fan are set in the electric box of the numerical control machine tool to keep the working temperature of the electronic components, especially the Central Processor, constant or small temperature changes. However, this is still not enough to ensure the loss of accuracy of the machine tool during processing, because the machine tool will generate excessive temperature during processing, which will reduce the service life of the numerical control machine tool control system components. The increase of temperature and humidity, the increase of dust, the bonding of the integrated circuit board, the short circuit, and the failure of the machine tool. Therefore, try to ensure the certainty of the surrounding environment of the machine tool. In addition to temperature, the numerical control machine tool cannot be placed in a place with corrosive gas. If the electronic components are corroded by corrosive gases and the system is short-circuited, serious results can be imagined. 3. Power requirements: numerical control machine tools need to run equipment with electricity, but generally enterprises that use numerical control machine tools are not just one piece of equipment. There are many equipment and the power grid changes greatly when used at the same time, which affects the processing effect. So when installing numerical control machine tools, we must strictly control and select the power supply used. Only by controlling the voltage fluctuation within a safe and stable range can we not affect the normal operation of machine tool processing and numerical control system. EMAR is guided by "Mingli Integrity, Unity and Pragmatism" to meet customer needs; professional technical team and perfect after-sales services system to ensure delivery and timely supply; 100% from the customer‘s point of view, one-to-one caring service to maximize the protection of customer interests; more metal products factory, precision sheet metal, sheet metal factory, metal stamping, metal stamping, CNC lathe processing Please log in: http://www.sjt-ic.com/