The machining method of the surface of a CNC lathe depends first on the technical requirements of the machined surface. However, it should be noted that these technical requirements are not necessarily the requirements specified in the part drawing, and sometimes may be higher than the requirements on the part drawing in some aspects due to process reasons. For example, due to the fact that the reference does not coincide, the machining requirements for the surface of some cnc plus workpieces may be increased. Or because it is used as a fine reference, it may put forward higher machining requirements. A6T Hardware Factory, Hardware Products, Metal Products, Precision Sheet Metal, Hardware Processing, Sheet Metal Factory, Metal Stamping, Hardware Processing, CNC

After the technical requirements of each CNC plus workpiece surface are clarified, the final processing method that can ensure the requirements can be selected accordingly, and the processing method that requires several steps and each step can be determined. The selected CNC Machining method should meet the requirements of the quality of the parts, good machining economy and high production efficiency. To this end, the following factors should be considered when selecting the machining method: 1. The machining accuracy and surface roughness that can be obtained by any CNC lathe machining method have a considerable range, but only in a narrow range is economical. The machining accuracy of this range is economical machining accuracy. For this reason, when selecting the machining method, the corresponding machining method that can obtain economical machining accuracy should be selected. 2. To consider the nature of the material of the cnc machined parts. 3. To consider the structural shape and size of the cnc machined parts. 4. To consider the requirements of productivity and economy. When mass production, high-efficiency advanced technology should be adopted. Even the manufacturing method of the blank can be fundamentally changed, which can reduce the amount of labor in machining. 5. To consider the existing equipment situation and technical conditions of the factory or workshop. When choosing the CNC lathe processing method, the existing equipment should be fully utilized, the potential of the enterprise should be tapped, and the enthusiasm and creativity of the workers should be given full play. But it should also be considered to continuously improve the existing processing methods and equipment, adopt new technologies and improve the level of technology. This information is provided by EMAR hardware manufacturers, and more hardware factories, hardware products, metal products, precision sheet metal, metal processing, sheet metal factories, metal stamping, metal stamping, metal processing, CNC lathe processing, and other information. We warmly welcome people from all walks of life to visit our factory for negotiation and guidance. We will serve you wholeheartedly.