Hardware products Precision Metal Stamping is a process that uses punches and dies to deform or break stainless steel, iron, aluminum, copper and other sheets and heterosexual materials to achieve a certain shape and size. Precision hardware refers specifically to the hardware processing category that requires high precision in the hardware industry. It is a subdivision of the general hardware industry. Generally, it refers to the hardware workpiece with precision requirements within 0.05mm. So what are the operation steps of precision hardware stamping? e1V hardware factory, hardware products, metal products, precision sheet metal, hardware processing, sheet metal factory, metal stamping, hardware stamping, hardware processing, CNC

1. All employees check whether their clothing meets the work requirements before entering the job. Slippers, high heels and clothing that affect safety are not allowed, and hard hats should be worn for those with long hair. Keep the correct posture when working, and have sufficient spirit to cope with the work. If you find physical discomfort, you should leave the job immediately and report to the leader. Concentrate your thoughts during operation. It is strictly forbidden to chat and cooperate with each other. Operators should not operate in a state of irritability and fatigue to avoid accidents and ensure safe operation. 2. Check whether the moving part of the hardware machinery is filled with lubricating oil before work. Then start and check whether the clutch and brake are normal. Turn the machine by air for 1-3 minutes. It is strictly forbidden to operate the machine when there is a failure. 3. Turn off the power supply first when replacing the precision hardware stamping die. After the stamping machine sports department stops running, the installation and debugging of the die can be started. After the installation and adjustment are completed, move the flywheel by hand to test the stamping twice to check whether the upper and lower molds are symmetrical and reasonable, whether the screws are firm, and whether the blank holder ring is in a reasonable position. 4. After all other personnel leave the mechanical working area and take away the sundries on the workbench, the power supply can be started to start the machine. 5. After the hardware products machinery is started, one person will transport the materials and operate the machinery. Others must not press the electric construction or step on the foot switch board, let alone put their hands into the mechanical working area or touch the moving part of the machinery with their hands. When the machine is working, it is forbidden to put your hand into the slider work area, and it is strictly forbidden to take and put the workpiece by hand. Use tools that meet the standards when taking and putting the workpiece in the die. If you find that the machine has abnormal sound or the machine fails, you should immediately turn off the power switch for inspection. 6. When you get off work, you should turn off the power supply and sort out the finished products, scraps and sundries on the post to ensure a clean and safe working environment. This information is supplied by EMAR hardware manufacturers. More hardware factories, hardware products, metal products, precision sheet metal, hardware processing, sheet metal factories, metal stamping processing, hardware stamping processing, hardware processing, CNC lathe processing and other information. We sincerely welcome people from all walks of life to visit our factory to negotiate and guide. We will serve you wholeheartedly.